The advancement of molds and technology is accelerating. New technologies, new materials, and new molding have driven new structures and new products of molds. The characteristics of technology driving are obvious. The mold industry has shifted from tracking to a new stage of tracking and parallel operation, and a group of companies have entered the manufacturing phalanx. Refinement, automation, informatization, integration, networking, intelligence and industry quality enhancement and optimization and upgrading, mold products will continue to develop in the direction of large-scale, precise, and integrated.
Good plastic washbasin mold structure design is a prerequisite for a qualified mold manufacturing. Our factory has more than 10 years of plastic washbasin mold design and manufacturing experience and can conduct a full analysis of mold structure and product structure (including: mold demolding angle, product The epitome of the surface, the design of the gating system.
Exhaust system design, cooling system design, etc.) These plastic basin molds are prone to problems that will be tested repeatedly during the mold structure design.
1）. In the early stage, the structure should be designed, and different material formulas should be selected in the structure, and the scientific materials used for the mold base, mold core cavity and slider part.
2） Plastic washbasin mold steel is strongly recommended to use 3 times of treatment, quenching and tempering, vacuum 42-46 degree hardness treatment, temperature 48 hours tempering. The most important thing is to control the distance of each piece of steel in the furnace to keep each piece of processing uniform, and not to be too hard locally to cause cracks.
3）. The plastic washbasin mold must be closed on the mold clamping machine due to its matching balance. When the plastic washbasin mold is placed on the injection molding machine for production, the upper mold is installed, and then the injection molding machine is opened to allow the lower mold to hang in the air to reclose the mold. Completely install the plastic washbasin mold on the injection molding machine to let the balance run-in automatically, so as to improve the life of the plastic washbasin mold.
4）. Nowadays, an automatic mold protection system is adopted, the purpose is to automatically stop the injection molding machine when the product does not fall off or due to abnormal operation, and reliably protect the plastic washbasin mold from damage.
1. After signing the contract with the customer and confirming the start of production, our business will report the production progress to the customer as scheduled.
2. When customers are unable to personally understand our mold operations, we will send them to customers in the form of videos, pictures, etc. during the mold manufacturing process based on the characteristics of these customers, so that customers can see their mold processing status, understand Customers of molds can tell at a glance whether our workmanship is attentive. For customers who do not understand molds, we can also explain them carefully.
Post time: Dec-10-2021