The characteristics of the fruit box injection mould process are that the production speed is faster and more efficient, the actual operation can complete the automation technology, there are many classifications, the appearance can be from simple to complex, and the specifications can be from large to small. In order to better develop the processing quality level of injection moulding fruit box moulds, what should be paid attention to in the process of making fruit box moulds?
1. The seat should be influential. Accurate positioning methods include hand slingshot, bead string, standard clips, etc. The drawings of plastic injection moulds should be detailed according to various regulations. The row seat must have a pressure strip and wear resistance. Wear-resistant materials should be used for beading and wear-resistant steel, and the oil groove should be improved.
2. Pay attention to the maintenance of the surface of the test tube embryo to avoid corrosion or scratches during the production process. Before packaging the fruit box mould, the inside of the mould should be sprayed with milky white/no color rust-proof oil, and all surfaces of the mould should be cleaned and then coated with unsalted butter.
3. There should be no bevel in the processing of the injection mould of the fruit box, and rounding is required. Especially outside the venue. The diameter of the accurate positioning ring should match the assembly drawing, and the continuous mode and influence of the ejector should match the assembly drawing.
4. Side locks (straight locks) should be installed on the four sides of the fruit box injection mould processing. If the side lock cannot be installed, the plastic pipe injection mould requires the installation of a cone lock or a cone lock. Cone locks should be installed sideways.
5. All mould materials, model specifications and levels shall be purchased according to the technical standards announced and determined during the order information or program verification process. The material proof should be supplied, and if it is a hard mould, a thermal penalty report should be supplied.
6. Generally, the injection moulding fruit box mould processing should be placed with support, and the two sides should be leveled. The small mould requires 0.1mm, and the large prestress tension is 0.1mm-0.15mm.
7. The template test tube embryo manual set requires the production and processing of the exhaust pipe groove to avoid the increase of the manual belt. Try to prevent the use of grinding machines to grind moulds. If you do not want to use grinding equipment for production and processing, you should use oil stone to save light (especially the surface of the plate).
Post time: May-25-2022