2021 Good Quality Plastic Injection Automobile Mould - Auto Other Parts Mould – Aojie Mould
2021 Good Quality Plastic Injection Automobile Mould - Auto Other Parts Mould – Aojie Mould Detail:
Car interior and exterior trim mould making
Provides a complete line of plastic mold and molding components for cars and truck regarding air induction systems, fluid management systems, fuel systems, car exterior and interior trim moulds systems, including instrument panels,bumper,car door mould,fenders,grilles,tail light and spoilers for the global automotive industry. Processes include blow molding, injection molding, thermoforming, interior/exterior painting, and metal stampings .
The main steps of car exterior and interior trim moulds trial
In order to avoid production time waste, it is necessary to adjust and control various processing conditions before mass production to find out the best temperature and pressure conditions, for future daily operation.
keep the continuous products measurements and record the important dimensions (sample should be cooled to room temperature for measurement).Compare the samples size, pay attention to:
The optimization running operation should keep for at least 30 minutes until stable, then at least have a dozen of moulded samples, the make notation indicating the date , number and cavity , in order to test the its operation stability and the reasonable tolerance .
reasonable adjustments to reduce the overall cycle time.
screw forward time should be longer than the plastic gate freezing time; otherwise, the weight of the product can be reduced. And when the mould is heated, the screw forward time also need extend for compaction products.
wait until the machine and mould conditions to be stabilized, even for a medium-sized machine it may have to wait more than 30 minutes. Use this time to check the products possible problems.
adjust the pressure and injection volume to produce a product with satisfactory appearance. The flash should be avoided completely, especially for some moulded products not yet fully solidified. Little change in the filling rate may cause a great change in the filling.
clean the feeding system thoroughly prevents degradation compound or foreign material into the mould. Because they would be harmful for the mould operation. Check the material temperature and the mould temperature if suitable for the processing.
checks the barrel for the correct plastic material, and the correct drying (different raw materials for trial and mass production may lead to different results).
If the size of product is stable;
if some certain sizes have increase or decrease trend, and display machine processing conditions still changing, such as poor temperature control or oil pressure control;
The size change is within tolerance.
if the product size does not change also the normal processing conditions are stale, to observe whether each cavity moulded sample weight acceptable, the size should be within allowable tolerances. The consecutive unstable weight should be kept, in order to check the mould cavity size.
Product detail pictures:
Related Product Guide:
Our primary objective is usually to offer our shoppers a serious and responsible small business relationship, offering personalized attention to all of them for 2021 Good Quality Plastic Injection Automobile Mould - Auto Other Parts Mould – Aojie Mould , The product will supply to all over the world, such as: Ottawa, New Zealand, Oslo, With more than 9 years of experience and a professional team, we have exported our products to many countries and regions all over the world. We welcome customers, business associations and friends from all parts of the world to contact us and seek cooperation for mutual benefits.
Q: What services do you provide?
A: We manufacture plastic injection molds and produce plastic injection parts for sampling and bulk production.We also provide mold design services.
Q: How can I contact you?
A: You can send us an inquiry via email, WhatsApp, Skype or Wechat. We will reply to you within 24 hours.
Q: How can I get a quotation?
A:After receving your RFQ, we will reply to you within 2 hours. In your RFQ, please provide the following information and data in order for us to send you competitive pricing based on your requirements.a) 2D part drawings in PDF or JPG format & 3D part drawings in UG, PRO/E, SOLIDWORKS, CATIA, CAD, STP, X_T, IGS, PRT, DWG, or DXFb) Resin information (Datasheet)c) Annual quantity requirement for parts
Q: What shall we do if we don’t have part drawings?
A: You can send us your plastic part samples or photos with dimensions and we could provide you our technical solutions. We will create .
Q: Can we get some samples before mass production?
A: Yes, we will send you samples for confirmation before start of mass production.
Q: Due to time difference with China and overseas, how can I get information about my order progress?
A: Every week we send weekly production progress report with digital pictures and videos that shows the production progress.
Q: What is your leadtime?
A: Our standard leadtime for mold production is 4 weeks.For plastic parts is 15-20 days depending on the quantity.
Q: What is your payment term?
A: 50% as payment deposit, 50% balance will be paid before shipping. For small amount, we accept Paypal, Paypal commission will be added to the order. For big amount, T/T is preferred
Q: How can I guarantee our quality?
A: During mold making, we do material and part inspection. During part production, we do 100% full quality inspection
before packaging and reject every parts that is not according to our quality standard or the quality approved by our client.
By Alice from Guatemala - 2017.12.19 11:10
Production management mechanism is completed, quality is guaranteed, high credibility and service let the cooperation is easy, perfect!
By Riva from Cannes - 2018.12.25 12:43